ipBalance

Tweet

Quick Cisco 3750 Stack Configuration Guide

* The priority value can be 1 to 15. The default priority value is 1 ( 1 < 15)
**

1. To check status

Cisco3750# show switch detail
 

Switch#  Role      Mac Address     Priority     State 
--------------------------------------------------------
 1       Slave     000c.30ae.4f00     9         Ready
*2       Master    000d.bd5c.1680     15        Ready

2. To manually change the stack member number

Cisco3750# conf t
Cisco3750(Config)# switch (Current stack#) renumber (New stack #)

 3. To reset in the stack
Cisco3750# reload slot (Stack member #)
 4. To change the priority value for a stack member
Cisco3750# conf t
Cisco3750(Config)# switch (Stack member #) priority (Priority value)


5. To upgrade a stack member using the IOS from another stack member

Cisco3750#archive copy-sw /destination-system (destination-stack-member-number)
/force-reload (source-stack-member-number)


6. To run a command
Cisco3750# remote command (Stack member #) show xxxxx

ex) remote command 2 show ver