ipBalance

Tweet

BGP configuration for Nortel/Tasman router

The following example is just for single point-to-point link. In order to configure Nortel/Tasman router, just copy and paste below configuration from configuraion mode

Neighbor IP : 10.10.10.1
Neighbor ASN : 200

ip
   route 0.0.0.0 0.0.0.0 10.10.10.1 1
exit ip

router  bgp 100
    distance 170
    redistribute  static
    redistribute  connected
    group BgpExternal external
    exit group
    group BgpInternal internal
    exit group
    neighbor 10.10.10.1 200
    exit neighbor
    exit bgp

Tasman-Router> conf t
Tasman-Router/configure> router bgp 100
Tasman-Router/configure/router/bgp 100> ?
     
      aggregate_address-- configure bgp aggregate entries
      always_compare_med-- allow comparing MED from different neighbors
      default_metric  -- set metric of redistributed routes
      distance        -- set protocol distance for BGP routes
      group           -- specify a group
      neighbor        -- specify a neighbor router
      redistribute    -- redistribute routes from another protocol

> To see advertisement of your route

Tasman-Router> display ip bgp neighbors address 192.168.0.1 adv

> To see what you receiving from peer/neighbor
  
Tasman-Router>display ip bgp neighbors address 192.168.0.1 rec